BA15S LED white 24 volt 19smd - 2 pieces

BA15S LED lamp white with 19-smd, suitable for 24 volt use. 

Are you looking for a good LED lamp that you can exchange for your original mounted BA15S halogen lamp? Then this white BA15S LED lamp may be the lamp you are looking for. The LED lamp is equipped with 19 LED's that shine forward and is supplied per set of 2 pieces. The LED lamp has a light output that you can compare with a 21w halogen lamp. The BA15S LED lamp white can only be used on 24 volts. This means that you can use the LED lamp for example in your truck, camper or trailer. To ensure that the white LED lamp fits, the original lamp fitted must be the same as that shown in picture 3. If it does not match, the LED lamp will not fit.

To make sure that the BA15S LED white lamp is suitable for your vehicle or trailer, we have written a number of specifications below. All this to make it clear to you why this might be the BA15S LED lamp you are looking for. This LED lamp has, among other things, the ECE R10 quality mark. This quality mark means that the lamp will not cause any interference during activation, for example on your radio signal. The LED lamp can also be used up to 32 volts. This means that the LED lamp is protected against peak voltage that can occur when starting your vehicle.

Dimensions:

To make sure that you can mount the BA15S LED white lamp wherever you want, we have noted the dimensions below. The dimensions of this white LED lamp with bayonet connection are as follows:

• Length: 44 mm
• Top width: 26 mm
• Bottom width: 15 mm

Please note, these LED lamps are not CAN-Bus proof. This means that this lamp can report a defective lamp on your dashboard. This mainly applies to newer models of cars, trucks are often excluded. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system. 

Other colors:

Are you looking for a p21w LED lamp? But is the BA15S LED lamp white with 19SMD not the color you are looking for? Then know that the LED lamp with bayonet connection is also available in the following colors:

• BA15S LED lamp red – 19 smd

Why does this BA15S LED lamp not have an E-mark:

Replacement lamps must comply with European standards regarding safety, watertightness and the prevention of short circuits (ECE-R37). These standards are based on the incandescent and halogen lamps of the past. LED replacement lamps cannot meet those standards. The reason is because there is no filament in it. As a result, this LED lamp does not receive the ECE R37 quality mark and can therefore officially not be used on public roads. You can use the BA15S LED white lamp on your own terrain or in racing, for example.